Home / Verkoop / Overig / Tools

Bestellen

Tools

Tools

Digital Sound Level Meter


Cable Tester


Roady Multimeter



Digital Clamp Meter



Digital Luxmeter



Ultrasonic Distance Meter

Digital Sound Level Meter

LCD digital display
• Analog bar indicator
• Wide dynamic range
• Auto/manual range
• Fast/Slow response selectable
• Max value Hold function
• A/C weighting selection
• Date and time display
• AC/DC auxilitary output
• Backlight
• Low power indication

Measurement range: 30dB-130dB
Accuracy: +/-2dB
Resolution: 0,1dB
Sample rate: 2 times/s
Frequency range: 20Hz - 8kHz
Over range indication: UNDER or OVER
Voltage: 1,5V (6x AAA)


Cable Tester

This is an on-the-road tool you certainly can't miss in your gearbox! A nifty, handy cabletester, which allows you to check up to six (welding) connections and gives you a visual readout by 2 rows of 6 LED's. The checking itself is done manually per connected pin. A LED will light up to indicate what pin is connected correctly on which side. A short-circuit check with a red LED and audio-warningsignal is also included. On the left and right side you'll find inputs for 6,3 symm. jack, BNC, RCA, 5p. DIN, 5p. XLR, 3p. XLR and Neutrik® Speakon®.

Roady Multimeter

The Showtec Roady Multimeter is the ideal tool which should be in each toolcase of each roady. This multimeter measures not only the basic values but also contains a dB meter, Lux-meter and thermometer.

Auto range/manual range
Data hold
Auto power off
Backlight
DC voltage: 200m/2/20/200/1000V +/- 0,7%
AC voltage: 200m/2/20/200 +/- 0,8%, 750V +/- 1%
DC milli-voltage: 20m/200mV +/- 0,7%
AC milli-voltage: 20m/200mV +/- 0,7%
DC current: 200u, 2000u, 20m, 200mA +/- 1,2% 2/10A +/- 2,0%
AC current: 200u, 2000u, 20m, 200mA +/- 1,5% 2/10A +/- 3,0%
Resistance: 200/2k/20k/200k/2M/20MOhm +/- 1,0%
Temperature (thermocouple): -20C - 1000C +/- 3%, 0F - 1800F +/- 3%
Temperature (NTC): 0 - 40C +/- 2C, 32F -104F +/- 4F
Humidity: 20% - 95%RH +/- 5%
Lux 2000 - 20000 Lux +/- 5%
Sound level: 60 - 120dB
Power: 1,5V (3x AAA)
Size: 195 x 92 x 55mm
Weight: 400gr

Digital Clamp Meter
with LED Light


A digital clamp meter with multimeter function and a built-in LED torch light and backlight for use in dark environments.

Auto/Manual range
Back Light Function
LED Torch light
DCV 6/60/600V +/- 0,8%, 1000V +/- 1%
ACV 6/60/600V +/- 1%, 700V +/- 1,2%
ACA 600A +/- 2,5%, 1000A +/- 3%
Resistance: 600/6k/60k/600k/6M Ohm +/- 1%, 60M +/- 5%
Capacitance: 600n, 600u, 60u, 600u, 1000uF +/- 4%
Frequency: 40Hz to 100kHz +/- 0,1%
ADP Measurement: 600mV +/- 3%
Max diameter per conductor: 42mm
Power: 1,5V (3x AAA)
Dimensions: 225 x 86 x33mm
Weight: 320g

Digital Luxmeter


A compact luxmeter to measure the lightoutput or lightintensity.

Ranges: 0 - 2000 Lux +/- 5%, 2000 - 19990 Lux +/- 5%, 20000-50000 Lux +/- 5%
Photo detector: one silicon photo diode with filter
Photo detector lead length: 150 cm
Photo detector size: 83x52x20,5mm
Power: 6F22 (9V) x1
Size: 125,5x72x27mm
Weight: 180g

Ultrasonic Distance Meter


Want to make sure that your trussing is aligned?
Want to know the height of the venue?
Want to know the volume of the room?
No problem! Know it in a few moments with this Ultrasonic Distance Meter!

• Calculates area and volume
• Laser to target the point from where you want to measure
• Auto converts feet to meters
• Backlight

Measurement range: 0,6 to 15m
Accuracy: ±0,5%±1Digit
Resolutions: 0,01m.
Aperture angle: ±5degrees
Power supply: 6F22(9V)x1
Dimensions: 136x59x38mm
Weight: approx. 150g. (incl. battery)

Digital Sound Level Meter Prijs per stuk:  € 169,- bestelnr.  HL91004
Cable Tester Prijs per stuk:  € 99,- bestelnr.  HLD1907
Roady Multimeter Prijs per stuk:  € 67,- bestelnr.  HL91001
Digital Clamp Meter Prijs per stuk:  € 89,- bestelnr.  HL91002
Digital Luxmeter Prijs per stuk:  € 42,- bestelnr.  HL91003
Ultrasonic Distance Meter Prijs per stuk:  € 35,- bestelnr.  HL91005

 © 2006-2009 VDO Licht & Geluids Techniek - Alle prijzen zijn inclusief 19% BTW